DIY Microsoft Surface Laptop 3 15 Feet Replacement

Duration: 45 minutes
Steps: 6 Steps

Ready to tackle those worn-down feet on your Microsoft Surface Laptop 3 (15″)? This guide will walk you through removing or swapping out the feet on the bottom of your laptop. Microsoft even offers replacement feet for the Surface Laptop 3—check out their support article for all the details on how to snag some new ones!

Step 1

– Turn your laptop upside down and set it on your workbench, feet up.

Step 2

– Each foot has a secret little indent that makes popping it off a breeze.

– To get the spudger in the indent, slide it along the closest long edge and gently push parallel to the shorter sides of your laptop, just like shown.

Tools Used
  1. SpudgerMicrosoft Surface Laptop 3 15

Step 3

– Grab that trusty spudger and slide the pointed end right under one of the two rear feet, focusing on its back edge.

– Give the spudger a little nudge underneath the foot and gently pry it up to set it free.

– Now, rinse and repeat to liberate the second rear foot!

Tools Used
  1. SpudgerMicrosoft Surface Laptop 3 15

Step 4

– Slide the pointed end of your trusty spudger under one of the two front feet, right at the front edge.

– Gently push the spudger underneath that foot and give it a little pry to pop it loose.

– Now, do the same for the second front foot and voilà!

Tools Used
  1. SpudgerMicrosoft Surface Laptop 3 15

Step 5

– While putting everything back together:

– Remember, the front and rear feet are different.

– The front feet are directional and only snap in one way.

Step 6

– All done? Nice work! If you hit a snag, try some troubleshooting basics or search our Answers community for expert help.

– Change your mind? No worries, you can always schedule a repair if you need a hand.

Success!

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.