DIY Samsung Galaxy S One Loud Speaker Replacement Guide
Duration: 45 minutes
Steps: 10 Steps
Heads up, tech whiz! Make sure you’ve got your tools ready and your workspace prepped. Let’s make this repair a smooth ride!
Having trouble jamming out to your tunes because your phone’s speaker just won’t cooperate? No worries! This guide is all about getting your grooves back by swapping out that rebellious media speaker. Let’s crank up the repair vibes!
Step 1
– Spot the tiny groove on the bottom edge of your gadget, teasing you between the back and front cases.
– Gently wedge your finger into the groove and give the back case a friendly tug to pop it off. Let the separation commence!
Step 2
– Pop that battery out! Just nudge the bottom edge upward and away from the phone like it’s jumping off a diving board.
Step 3
– Gently press down and slide away from the slot to free your SIM card, then snag it by pulling towards the phone’s bottom edge. Voila!
Step 4
– Unscrew the seven 4.5 mm Phillips #00 screws that are partying around the perimeter of your phone.
Step 5
Heads up! As you remove the midframe, the power and volume buttons might just pop out like a surprise party for your phone’s sides!
– Kick things off near the power button and grab a plastic opening tool to pop open those sneaky plastic clips holding the midframe in place.
Step 6
– Wiggle that SD card out of its cozy nook!
Step 7
– Spot the seven sneaky screws hanging out on the plastic case.
– Grab your trusty Phillips #00 Screwdriver and show those seven screws who’s boss!
Tools Used
Step 8
– Alright, you’ve unscrewed all seven screws! Now, grab your trusty Plastic Opening Tools and gently pop open those plastic snaps along the black casing’s seam. It’s like unlocking a treasure chest, but instead of gold, it’s gadget glory!
– Take it easy with the snaps—treat them like delicate cookies that you don’t want to crumble. Patience is your best friend here!
Step 9
– Once you’ve unclicked all those sneaky plastic snaps, the black plastic shell should just pop right off. Easy peasy!
– Now, let’s find that speaker!
Step 10
– Grab your Plastic Opening Tools and show that golden-brown clamp who’s boss by carefully lifting it to free the speaker’s ribbon cable.
– Gently coax the speaker out of its cozy home.