Ematic Model FTABMP2 Case Replacement
Duration: 45 minutes
Steps: 5 Steps
Step 1
– Grab a spudger and gently work it around the edges of your device to pop the case open and take a peek inside.
Step 2
– Gently disconnect the LCD cable from the motherboard by squeezing the two sides of the clamp, allowing the device to gracefully part ways. It’s like a little dance between components!
Step 3
– Grab your trusty spudger and gently work it to lift the LCD away from the clamps that are keeping it snug in the case.
Step 4
– Ready to dive in? First, if you’ve got to get that back casing off, once you’ve disconnected the LCD display from the motherboard, it’ll be time to say goodbye to those screws holding the motherboard in place. Next up, gently pop off those plastic power and volume buttons. And don’t forget to carefully detach the two side grips of your device. You’re doing great!
Step 5
– Now, to put your device back together, just reverse these steps like a pro! If you find yourself stuck, don’t hesitate to schedule a repair for some expert help.
–
