Hipstreet Equinox 2 Motherboard Replacement
Duration: 45 minutes
Steps: 6 Steps
Uh-oh! If your motherboard takes a nasty tumble or gets a bit too much love while you're swapping another part, it’s time for a replacement. Just a heads-up, all your data lives on the motherboard, so be prepared to say goodbye to it. But don’t stress! If you need a hand, you can always schedule a repair and we’ll take care of the rest!
Step 1
- Grab your PH00 screwdriver and twist out those two 3mm screws with a steady hand.
Step 2
- Grab your trusty blue plastic opening tool and gently work your magic to pop the back case off. You've got this!
Step 3
- Carefully unsolder these wires from the motherboard, and don’t forget to label them as you go along, just like the handy picture to the left! It’ll make reassembly a breeze.
Step 4
- Gently lift the clip shown in the picture to release the contact strips, then carefully pull the strip out of the clip. You've got this!
Step 5
- Using the trusty PH00 screwdriver, carefully unscrew those 3.5mm screws from the spots highlighted in the picture. You've got this!
Step 6
- Carefully lift the tablet's motherboard, making sure no wires are still connected or trapped as you ease it out.