How to Buff an Apple Watch

Duration: 45 minutes

Steps: 6 Steps

Give your Apple Watch a fresh, brand-new look by following these simple steps. This guide shows you how to safely remove those pesky scratches from the stainless steel casing without damaging any of the sensitive parts. All you’ll need is a little elbow grease and the right tools. Let's bring back that polished shine! Parts Needed: 1x Pair of rubber gloves, 1x Microfiber Cloth, 1x Cape Cod Polishing Cloth

Step 1

- Turn your watch over so the screen is facing down.

Step 2

- Pop those bands off like you’re unlocking a secret level—press the little buttons on both sides and give each strap a smooth slide to the right. Bam, wristwear no more!

Step 3

- Grab a microfiber cloth and give that watch a good wipe-down.

- Make sure to banish all those pesky smudges while you're at it!

Step 4

Keep that polishing cloth away from the microphone and speaker—those areas like their space!

If your polishing cloth starts turning black while you wipe, don’t worry—it’s just layers of grime coming off your watch. That means you’re making progress!

- Time to gear up! Slap on those gloves and grab a polishing cloth that's soaking in a bit of that creamy goodness. Give one side of the watch a nice back-and-forth rub. It's like a spa day for your watch!

- Keep the good vibes rolling and do the same magic on each side of the watch. Shine on!

Step 5

- Grab your microfiber cloth and gently buff the same area you cleaned earlier until all the residue is gone and the surface shines like new. Do this on each side of the watch for a flawless finish. If you need help, you can always schedule a repair.