How to Disassemble Samsung Galaxy S Blaze Step-by-Step Guide

Duration: 45 minutes
Steps: 10 Steps

This tutorial guides Samsung Galaxy S Blaze users through the disassembly process. Take care when handling the internal screws as they are prone to stripping. For successful disassembly, you’ll need a Phillips Head screwdriver (size 00) and a flat wedge opening tool.

Step 1

– Pop off that back plate like a champ!

Step 2

– Yoohoo! Time to liberate that battery from its cozy compartment.

Step 3

– Grab your trusty Phillips head screwdriver, size 00, and let’s get twirling!

– It’s time to unscrew the 4mm party poopers from the frame!

Step 4

– Grab your trusty blue plastic opening tool and let’s gently coax the frame off the phone.

– Circle the phone with the tool, nudging at the edges until the frame pops free like a toast from a toaster!

Step 5

– Pop those prongs off the frame and slide out that volume rocker like a boss!

Step 6

– The SD card slot is snug under a little keeper tab.

– Just pop the tab off the phone’s frame to free the SD card slot.

Step 7

– The power button is chilling on the phone, hooked up with two little prongs.

– Just gently unhook those prongs from the phone’s frame to free the power button.

Step 8

– Grab your snazzy blue plastic opening tool and pop those wire ribbons off the motherboard like a boss!

Step 9

– Pop off that last ribbon cable connector like a pro!

– Gently lift the motherboard out of the phone like it’s a sleeping kitten.

Step 10

– Check it out! Every single part is right here, ready to roll.

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.