How to Open Samsung Galaxy Watch Active

Duration: 45 minutes
Steps: 5 Steps

Ready to pop open your Samsung Galaxy Watch Active for some repair magic or a quick inspection? Let’s dive in and make it happen!

Step 1

– First off, let’s give your Galaxy Watch Active a little nap! Press and hold the bottom button for about 3 seconds. You’ll feel a quick vibration—just a little ‘goodbye’ shake!

– When you see the ‘Power off’ icon pop up, give that screen a tap right in the center to power it down. You’ll feel a longer vibration to confirm it’s off. You’re doing great!

Step 2

– Grab your trusty Tri-point Y00 screwdriver and let’s tackle those four 4 mm-long screws on the back of the watch. You’ve got this!

Step 3

– Grab your trusty opening tool and slide it between the plastic back cover and the metal housing, right near the buttons. You’re doing great!

– Gently push the tip of that opening tool into the little gap you’ve found to pop the back cover away from the housing. You’re making fantastic progress!

Step 4

– Gently lift the back cover about 2 cm to reveal the hidden treasure: the sensor array connector, which is right by those two buttons.

– Grab your trusty spudger and carefully disconnect the sensor array from the motherboard. You’ve got this!

Tools Used
  1. SpudgerOpening the Samsung Galaxy Watch Active

Step 5

– Ready to put things back together? Just follow these steps in reverse, and you’re good to go!

– Not feeling it? No worries—mark it as incomplete and come back anytime.

– If you hit a wall, don’t sweat it! You can always schedule a repair and let us handle it for you.

Success!

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.