How to Open Samsung Galaxy Watch: Step-by-Step Guide
Duration: 45 minutes
Steps: 5 Steps
Ready to dive in? Let’s pop off the back cover of your Samsung Galaxy Watch. It’s easier than you think, so let’s get started!
Step 1
– Pop out those four Tri-point #00 screws (4.2 mm long) from the back of your watch like a pro!
Step 2
Hold your horses! Don’t pop off that back cover just yet. There’s a sneaky flex cable connecting to the core assembly inside, and we don’t want to disturb it.
– Grab your trusty opening tool and gently slide it between the back cover and the metal housing of the watch.
– With a little finesse, carefully pop the plastic back cover open.
Step 3
– Place the watch face down, then gently pop off the back cover to reveal the sensor connector sitting snugly on the motherboard.
Step 4
– Grab your trusty spudger and gently pry the sensor flex cable loose from the motherboard. Easy does it!
Tools Used
Step 5
– Alright, let’s get that back cover off. We’re on a roll!
– When you’re buttoning up this watch, double-check that rubber gasket. If it’s looking worse for wear, swap it out with a fresh one. Gotta keep that seal tight!
Success!
