How to Open TicWatchPro HP
Duration: 45 minutes
Steps: 4 Steps
Get ready to dive into the world of repairs! This guide will help you pop open your TicWatchPro like a pro. Let’s get those tools ready and make some magic happen!
Step 1
Hold up! Don’t yank off that back cover just yet—it’s still connected to the watch assembly.
Depending on how your driver is feeling, a Torx T4 bit might just be the perfect fit!
– First things first, let’s give your watch a little break! Gently take it off the charger and power it down so we can get started on the repairs.
– Next up, grab your trusty Torx T3 screwdriver and remove those four 3.9 mm-long screws. You’ve got this!
Step 2
Watch out for that sensor flex cable, it’s sensitive – handle with care during this step!
– Gently lift the back cover from the edge near the watch crown and swing it open towards the sky!
Step 3
– Gently use the flat end of a spudger to lift and disconnect that sensor flex cable. You’ve got this!
Tools Used
Step 4
– To get your device up and running again, just reverse these steps – easy peasy!
– Hit a snag? Don’t worry, we’ve got your back! Check out our Answers community for some extra help.
– Change of heart? No big deal, just cancel this guide and we’ll catch you next time.
– You’re all done! Nice job! If you need help with anything else, you can always schedule a repair.
Success!
