How to Replace Asus K200MA-DS01T Keyboard Step-by-Step Guide

Duration: 45 minutes
Steps: 6 Steps

Replacing the keyboard on an Asus K200MA 11.6″ is a breeze with this clear and concise guide! This island-style keyboard works perfectly with 1.5mm keys in a 1.5-2mm range. If you find yourself in need of assistance, you can always schedule a repair.

Step 1

– Alright, let’s get that laptop ready for some TLC! Start by flipping it over so the opening is facing you, and let’s tackle those screws on the back panel.

– First up, grab your trusty Phillips #0 screwdriver and remove six 4mm Phillips screws. They’re just waiting to be freed!

– Now, don’t forget the grand finale: one 12mm Phillips screw in the center. Give it a gentle twist with your Phillips #0 screwdriver, and you’re all set!

Step 2

– Grab a trusty plastic spudger and gently pop off the two rubber stoppers near the hinge. This will unveil the hidden screws just waiting to be accessed.

Tools Used
  1. Spudger

Step 3

– Let’s get this party started by unscrewing these little guys:

– Grab your trusty Phillips #0 screwdriver and go for those two 4mm Phillips screws!

Step 4

– Grab a plastic spudger and channel your inner superhero! With a bit of determination, gently pry the back panel away from the keyboard to set it free.

Tools Used
  1. Spudger

Step 5

– Time to say goodbye to those keyboard connectors! Carefully wiggle out the wide connector from the keyboard and back panel. It’s like giving it a little hug goodbye.

– Now, gently coax the narrow connector away from the keyboard. Think of it as a smooth dance move; just keep it light and breezy!

Step 6

– With the keyboard connectors unplugged, gently lift the keyboard away from the back panel hinges. You’ve got this!

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.