How to Replace Google Pixel 7 Pro Screen: Step-by-Step Guide

Duration: 45 minutes
Steps: 12 Steps

This repair guide comes straight from the team at Salvation Repair! Don’t worry, it’s legit and you don’t need any Google endorsements. But, we promise it’ll guide you smooth as butter in fixing that screen on your Google Pixel 7 Pro. After you’re done, make sure you’re a pro at the adhesive game so your phone stays dry and happy. Oh, and keep in mind, this guide is all about the Pixel 6 Pro, but follow along and your Pixel 7 Pro will thank you! If you need help, you can always schedule a repair and let the experts handle it.

Step 1

– Get ready to tackle that adhesive – use the flat end of your trusty spudger to scrape off as much as you can.

– Now it’s time to get a little more precise: use tweezers or your fingers to carefully peel and remove any remaining adhesive.

– Give the perimeter of the frame a good cleaning with a small amount of strong isopropyl alcohol (we’re talking over 90%) and a lint-free or microfiber cloth. If you need help, you can always schedule a repair

Step 2

– If you’re giving your screen a second chance, give it a good cleaning, just like you did with the frame.

Step 3

– Before you stick on that fresh adhesive, give it a little test run by laying it over the frame. This will help you nail down the right orientation like a pro!

Step 4

– Grab that handy pull tab at the top of the adhesive and gently peel away the clear protective backing. You’ve got this!

Step 5

– Start laying that adhesive strip at the bottom edge of the frame. Just keep making tiny tweaks along the way.

Step 6

– Grab a spudger or your trusty fingers and give that adhesive a solid press along the edges, making sure it sticks to the frame like it’s meant to be there!

Tools Used
  1. SpudgerHow to Replace the Screen Adhesive for Your Google Pixel 7 Pro

Step 7

– Give that pull tab on the lower right of the frame a gentle tug and peel away the main liner like a pro!

Step 8

– Take a moment to inspect the front-facing camera hole and sensor cutout on your new screen. Make sure to peel off any pesky protective liners that might be hanging out in there.

Step 9

– Now that you’ve made it this far, head back to your phone’s guide and keep going – you’re almost done!

– You’re in the home stretch! Finish up this guide once your screen is in place and you’re ready to seal everything up. If you need help, you can always schedule a repair

Step 10

– Lift the handy pull tab on the upper left corner of the frame and peel away the liner that’s hiding the perimeter adhesive. You’ve got this!

Step 11

– Turn that screen over and gently rest it on the frame like it belongs there.

– Give the edges a little press to make sure it’s snug and ready for action!

Step 12

– Grab some tape and lay it around the edges of your rear glass to keep its shine intact.

– Find some coins or objects that are about the same thickness as the camera bar and use them to prop up the edges of the rear glass.

– Stack a few heavy books or whatever you’ve got lying around on top of your phone, and let them chill there for at least thirty minutes—or better yet, overnight for the best results!

– If you’ve got screen vise clamps, you can easily navigate around the camera bar. Just attach the clamps to the edges of your device.

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.