How To Replace Google Pixel 8a Adhesive: Step-by-Step Guide

Duration: 45 minutes
Steps: 16 Steps

This step-by-step guide is here to help you get your Google Pixel 8a back in tip-top shape! We’ll walk you through the process of applying new back cover adhesive after a repair. If you haven’t already, this guide will also show you how to remove the back cover. Need a hand? You can always schedule a repair.

Step 1

– Grab your trusty spudger and a pair of tweezers to gently pry up and whisk away the old back cover adhesive from around the entire frame. Let’s get this cleanup party started!

Tools Used
  1. SpudgerHow to Apply Back Cover Adhesive in Your Google Pixel 8a
  2. TweezersHow to Apply Back Cover Adhesive in Your Google Pixel 8a

Step 2

– Use a spudger and tweezers to gently lift and remove any adhesive from above and below the rear cameras. Take your time and be careful not to damage the delicate cameras. If you’re feeling a little overwhelmed, you can always schedule a repair.

Step 3

– If you’re reusing your back cover, let’s give it a good clean! Repeat the previous two steps to remove all the old adhesive from the cover.

Step 4

– Grab a pipette or syringe and let a few drops of super-concentrated isopropyl alcohol (over 90%) flow around the edges of the frame and the spots where those two smaller

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.