How to Replace Graphite Sheet in Google Pixel Fold – DIY Guide
Duration: 45 minutes
Steps: 5 Steps
Heads up! This repair guide comes straight from the experts at Salvation Repair, and while it’s packed with useful tips, it’s not officially endorsed by any big-name tech companies. Want to dive deeper? Check out more of our awesome repair guides here.
Hey there, tech enthusiast! This step-by-step guide will show you how to swap out the graphite sheet and thermal insulator in your Pixel Fold. It’s like giving your device a fresh start, and it’s easier than you might think! If you get stuck, you can always schedule a repair.
Step 1
Make sure that the clear liner is facing the logic board. It’s like making sure the good side of a sticker is facing out – you want to see that beauty!
– Lay the shiny new graphite sheet gently over the logic board and make sure it’s facing the right way. You’ve got this!
Step 2
Take it slow and steady, buddy! You don’t want to get this adhesive stuck in the wrong place. Just chill and work slowly. You got this!
– Okay, let’s unwrap that graphity shizzle and slap it on that logic board! Now, use your spudger or your fingers to make sure that bad boy’s sealed up tight, like a piece of toast in a ziplock. A+!
Tools Used
Step 3
– Time to unleash the graphite sheet! Peel off those blue liners and let that graphite shine!
Step 4
– Carefully peel the new thermal insulator away from its clear backing and stick the adhesive side onto the top left corner of the graphite sheet. You’re doing great!
Step 5
– Uh-oh! Did things go a little sideways during your repair? No worries! Try a few basic troubleshooting steps, and if you’re still stuck, don’t hesitate to reach out for some extra support. We’re here to help!
– Cancel: I did not complete this guide.
–
