How to Replace Huawei P9 Rear Camera – DIY Guide
Duration: 45 minutes
Steps: 5 Steps
Hey there! Just a friendly reminder to take your time and double-check everything as you go. If you hit a snag or need a hand, don’t hesitate to schedule a repair. You’ve got this!
Ready to give your Huawei P9 smartphone a camera upgrade? Follow this guide to swap out that camera like a pro! And hey, when putting your phone back together, don’t forget to add some fresh adhesive where it’s needed. You’ve got this!
Step 1
If your screen is sporting a crack, grab some tape to shield your eyes from those pesky glass shards and give yourself a better grip for opening up your phone. Safety first, and let’s get this repair party started!
– First, power down your phone and pop out that SIM card tray like a pro!
– Next up, grab your trusty Pentalobe P2 screwdriver and unscrew those two screws chilling at the bottom by the USB C port.
Step 2
– Grab your trusty iSclack or a suction handle and gently pry the phone assembly away from the rear panel. You’ve got this!
Tools Used
Step 3
– Gently pry away the fingerprint sensor using your trusty spudger.
Tools Used
Step 4
– First things first, let’s tackle those two Phillips #00 screws. Time to unscrew them with a smile!
– Now, gently lift off the bracket like you’re unveiling a surprise. You’ve got this!
Step 5
– Gently detach the connector like you’re unwrapping a gift.
– Carefully loosen the camera from the motherboard and set it aside, as if you’re giving it a little vacation.
