How to Replace LG Electronics Skills G6 Pre-Cut Adhesive Sheet
Duration: 45 minutes
Steps: 9 Steps
Hey there, repair champ! Just a friendly reminder to handle your device with care as you tackle this repair. If things get tricky or you feel like you could use a helping hand, don’t hesitate to schedule a repair. You’ve got this!
Not all replacement parts come with their own special adhesive, but many do include a handy pre-cut adhesive card featuring a range of shapes perfect for sticking things back together. This guide walks you through some of the most popular uses for that pre-cut adhesive card when fixing your device. Make sure to follow the specific repair guide for your phone and part to get the replacement instructions just right. Remember, this guide is all about using the pre-cut adhesive card that comes with some of the replacement kits. If you need help, you can always schedule a repair.
Step 1
When handling a battery, remember to treat it with care—let’s avoid any accidental pokes or bends!
– Kick things off by giving all those old adhesives, shards of glass, and any pesky debris the boot from every sticky surface. Out with the old, right?
– Once you’ve tackled the bulk of the adhesive, grab the tip of a spudger and gently scrape away those stubborn little bits stuck in tight spots. It’s all about the details!
Step 2
The next four steps showcase some example scenarios for using the pre-cut adhesive card. Take a moment to consider which approach suits your repair best, and then jump back in at step seven for the application and installation process.
– Grab a lint-free cloth (or hey, a coffee filter will do in a pinch) and soak it with a little isopropyl alcohol. Now, gently wipe down those adhesion surfaces like you’re polishing a prized trophy. For those tricky little corners and smaller areas, a Q-tip is your best buddy!
– Once you’re done cleaning, give it a moment to breathe. Wait at least a minute for that solvent to evaporate before moving on. Patience pays off!
Tools Used
Step 3
– Grab those narrow rectangular strips and use them to snugly secure the slender edges, like those on a display. They’ll hold everything in place just right!
– For the bigger stuff, like batteries, pull out the long rectangular strips. A few of these will do the trick to keep those hefty components firmly attached.
Step 4
– Utilize the slim adhesive edge of the card to keep those little rectangular components snug and secure.
Step 5
– Grab a small rectangle or that leftover bit of card to slice out quirky shapes for those tiny components.
– For those cute little square or rectangular parts, use a whole rectangle or even double up!
Step 6
– Grab those nifty arc-shaped cutouts to hold down those round components! Just remember to add some adhesive around any delicate bits that shouldn’t stick (like that NFC coil) or might tear, and don’t forget to secure those rounded corners too!
Step 7
– Before you dive into the sticky stuff, double-check that your replacement part fits just right and that all connectors can connect without putting a strain on their cables. If it feels safe, give your device a little power-up to make sure everything is working smoothly. If all systems are go, power it down and let’s keep going!
– With your device powered off, it’s time to apply that adhesive in the right shape for your repair.
– Grab a pair of tweezers and carefully peel off the backing from the adhesive. You’re doing great!
Tools Used
Step 8
– Gently pop in the new part, making sure it’s snug and aligned just right!
Step 9
– Press down evenly across the entire adhesive area for at least 30 seconds to really make that bond strong and secure. You’ve got this!
