How to Replace Martian Smartwatch Victory Battery – Step-by-Step Guide
Duration: 45 minutes
Steps: 10 Steps
In this guide, we’re showing you how to swap out the analog battery in the Martian Victory watch. A quick heads up: using the right tools for the job is key. Metal spudgers and screwdrivers can mess with sensitive internal parts and might even puncture the battery, which could be a serious fire risk. When working on electronics, always go for ESD-safe tools to keep things safe and sound. The metal spudger does a great job for tough prying, but for the everyday tasks, stick with the black nylon spudger or a plastic opening tool whenever you can.
Step 1
– Pop out those four 3.4 mm flat head screws like a pro—grab your trusty screwdriver and let’s make it happen!
Step 2
– Gently lift the back plate off the watch. Inside, you’ll spot the lithium battery and a rubber gasket that’s snugly attached to the back plate.
Step 4
– Cut the battery connections from the motherboard like a pro. Master the art of soldering components here!
Step 5
– Grab your trusty PH00 screwdriver and let’s tackle those two 2.4mm Phillips head screws! You’ve got this!
Step 7
– Grab your trusty PH00 screwdriver and let’s tackle that 5.2mm Phillips head screw like a pro!
Step 8
– Grab your ESD safe tweezers and gently lift off the gold ribbon cable. You’re doing great!
– Once that’s out of the way, you’ll spot a sneaky little 5.2mm Phillips head screw just waiting to be freed. Use your trusty PH00 screwdriver to remove it.
Tools Used
Step 9
– Grab your trusty spudger and gently nudge the motherboard towards the top of the watch, aiming for that sweet 12 o’clock spot to help it loosen up.
– Now you’re in the zone! You can check out the parts and pieces hanging out at the bottom of, and beneath, the motherboard.
Tools Used
Success!