How to Replace RAM in MECHREVO Z2 Laptop – DIY Guide
Duration: 45 minutes
Steps: 5 Steps
Hey there! Just a little heads up: if you find yourself in over your head or simply want a helping hand, don’t hesitate to schedule a repair. We’ve got your back!
Hey there, savvy techie! If your MECHREVO Z2 laptop is feeling a bit sluggish, it might be time to jazz things up with a RAM upgrade or replacement. Don’t forget to unplug that power supply before diving in. Let’s get your device back to its speedy self!
Step 1
– Grab your trusty Phillips screwdriver and get ready to tackle this! First up, remove eighteen 1.2mm Phillips #1 screws from the back. You’ve got this!
Step 2
– First things first, let’s get that back panel off! It’s time to reveal the secrets inside.
– Now, hunt down the memory slot; it’s the cozy little spot where your device keeps its extra brainpower.
Step 3
When both anchor pins are released, the RAM will pop up with ease.
– Gently pop open those retaining latches on each side of the RAM card using your fingers or a handy plastic tool. It’s like giving your device a little hug!
– Now, carefully lift out the RAM. You’ve got this!
Step 4
– Get that notched section of the RAM lined up with the raised bit of the card slot—like a perfect puzzle piece!
– Now, give it a gentle push until the notch and the bulge are best buddies.
– Finally, use your finger to press down on the other end of the RAM. You’ve got this!
Step 5
– Put that back plate together like a pro!
