How to Replace Samsung Feature Phone Speaker – Step-by-Step Guide
Duration: 45 minutes
Steps: 6 Steps
Got little to no sound coming from your speaker during calls or while vibing to your tunes? Your speaker might be kaput and ready for a swap. Use this guide to scope out any damage and, if needed, get that speaker replaced so you’re back to crystal-clear sound in no time!
Step 2
– Twist off the antenna top with a steady hand.
Step 4
– Take out the four 3 mm screws hanging out in the battery compartment—easy peasy!
– Hit those release buttons on the phone’s sides and, with a little finesse, wiggle and lift the back plate off. You’ve got this!
Step 5
– Squeeze those release tabs on both sides of the back casing like you’re giving them a gentle hug.
– Carefully nudge the motherboard loose and lift it out like you’re rescuing a treasure.
Step 6
– Start by finding the internal speaker unit at the top of the front plate of your phone. It’s just hanging out there, waiting for you to give it some attention!
– Now, grab a flathead screwdriver and gently pry that internal speaker away from the front casing. It’s like a little treasure hunt!
– Once it’s loose, go ahead and remove the internal speaker from the front casing. You’ve got this!
Success!
