How to Replace the Motherboard in LG Smartwatch: Step-by-Step Guide
Duration: 45 minutes
Steps: 5 Steps
Ready to swap out your motherboard? Make sure you’ve got your gear lined up! You’ll need plastic opening tools, a PH #000 screwdriver, and some trusty tweezers. Get these tools handy, and you’re all set to dive into replacing the motherboard for your LG Watch Urbane. Let’s do this!
Step 2
Time to get this watch open! Locate the small hatch at the bottom of the watch and use it to carefully pry it open – you got this!
– Let’s get started! Use a plastic opening tool to carefully pry open the back cover of the watch. Take your time and be gentle, we don’t want any accidental damage.
Step 3
Don’t let those three screws wander off! Stash them somewhere you’ll remember. A magnetic mat can be a real lifesaver for this – think of it as a cozy home for your screws!
– Grab your trusty PH000 screwdriver and let’s get those three screws out of the way to free the motherboard from the watch. You’ve got this!
– Now, take those handy plastic opening tools and gently detach the four connectors that are holding on to the motherboard. Easy peasy!
Step 4
– Grab those trusty plastic opening tools and gently lift up that motherboard – you got this!
– SKIP THIS IF YOU’RE JUST REMOVING THE MOTHERBOARD: Carefully use the plastic opening tools to remove the battery. Easy peasy!
Step 5
– To wrap up, simply follow these steps in reverse to get your device up and running again!
– If you need help or got stuck, don’t worry! You can always schedule a repair with Salvation Repair.
– You did it! Pat yourself on the back, you’ve completed the repair guide.
Success!
