Jazz UltraTab C1059-HL Antenna Replacement
Duration: 45 minutes
Steps: 10 Steps
This guide shows you how to easily remove and replace the antenna without breaking a sweat. The whole process should take about 20-30 minutes. Stick with the steps, follow them carefully, and you’ll have that antenna swapped out like a pro with zero drama for your device!
Step 1
– Start by loosening those screws on the top and bottom of your device. You’ve got this!
Step 2
– Pop off the back panel like a pro—don’t worry, it’s easier than it sounds!
Step 3
– After removing the back panel, carefully lay your device screen-down on the table. Give it a little rest—it’s earned it!
Step 4
– Find the antenna cover at the top of your device. It’s usually pretty easy to spot, so give it a look and get ready to dive in.
Step 5
– Unscrew the two little screws that are keeping the antenna cover snug and secure.
Step 6
– Gently slide a prying tool to pop off that pesky plastic piece from the antenna component. You’ve got this!
Step 7
– Look for the antenna, which is that gray cable peeking out from the plastic cover. It’s your clue that you’re on the right track.
Step 8
– Peel off all the sticky tape bits from the antenna cable. You’re doing great!
Step 9
– Now that you’ve peeled away all that sticky tape, gently wiggle out the antenna component like you’re freeing a trapped treasure. You’ve got this!
Step 10
– The antenna is cozying up to the chip inside your device, so be gentle – no sudden jerks!
– Desolder the wire that’s holding onto the chip. This will let you pop off the antenna like a pro.
– Once you’re done with that, it’s time for a glow-up! Swap out the old antenna for a shiny new one!
