Lenovo IdeaCentre K410 Power Supply Unit Replacement

Duration: 45 minutes

Steps: 6 Steps

Step 1

Lenovo IdeaCentre K410 Power Supply Unit Replacement

– Gently lay your computer down on its side, just like in the picture. It’s time to get to work!

– Now, let’s tackle those two 14mm screws! They’re loose enough for you to unscrew them with just your hands. Easy peasy!

Step 2

– Slide the side panel straight back with care and pop it off the computer—easy-peasy!

Step 3

The largest connection takes a bit of muscle to pop out—don’t hold back, it can handle it!

– Gently detach both bundles of wires hooking the power supply unit to the motherboard. You’ve got this!

Step 4

– Disconnect every cable hooked up to the optical drive and hard drive—give those cords a little freedom!

Step 5

– Grab your Phillips #2 driver and set your sights on those four 8mm screws holding the power supply unit to the computer’s outer shell. Unscrew them with style and care!

Step 6

– Gently pull the power supply unit away from the screw side and then out. You’ve got this!

Success!

Put all the parts back the way you found them, but reversed! You’re officially a repair pro now—but if you hit a snag, you can always schedule a repair.

Salvation Repair

If you like this content and would like to see more like it - let us know! It only takes a second and getting to know our audience is the whole reason we do this. So don't be shy - shoot us a quick hi!