Lenovo Ideatab A1107 Screen Replacement
Duration: 45 minutes
Steps: 11 Steps
Get ready to breathe new life into your Lenovo Ideatab A1107 with this straightforward screen replacement guide from Salvation Repair. We’ll walk you through the process of safely removing the screen, and provide you with a list of the necessary tools and handy photos to help you along the way. If you’re feeling stuck or unsure, don’t worry – we’ve got you covered. Just follow these easy steps and you’ll be enjoying your newly repaired device in no time. And if you need help, you can always schedule a repair.
Step 1
– Slide a plastic opener in between the sleek black back panel and the shiny silver body of your tablet.
– Gently work the plastic opener around the outer edge of the device to carefully pry that back panel off. You’ve got this!
Step 2
– Grab your trusty Phillips #000 screwdriver and get ready to remove seventeen tiny 4mm screws. It’s time to get this repair started!
Tools Used
Step 3
No need to panic if the volume and lock buttons decide to take a little vacation when you’re removing the interior casing. They’re just doing their own thing!
– Gently lift up the interior casing and set it aside, revealing the magic happening inside your device.
Step 4
– Gently grab those tweezers and whisk away the tape that’s snugly covering the battery’s wires. You’re doing great!
Tools Used
Step 5
Hey there! Just a friendly reminder: steer clear of poking that lithium-ion battery. A punctured battery can turn into a mini fireworks show, and nobody wants that!
And while you’re at it, ditch the metal tools for battery wire removal. They can shock you in more ways than one—electrocution is not a good look!
– Grab your trusty plastic spudger and gently nudge the battery’s wire harness to disconnect it from the device. You’ve got this!
Step 6
Hey there! Just a friendly reminder: steer clear of poking that lithium-ion battery. If it gets a hole in it, things could get a bit fiery or even explode! Let’s keep it safe and sound.
– Carefully slide a plastic opening tool between the battery and the device’s inner parts. Take your time, no rush!
– Gently use the plastic opener tool to lift the battery out of its home. It should come out easily with just a little nudge.
Step 7
– With a little finesse, gently lift the digitizer off using your hands.
Step 8
– Using your trusty Phillips #00 screwdriver, gently twist away those three screws that measure 2.0 mm in length and boast a head width of 5.25 mm. You’ve got this!
Tools Used
Step 9
– Gently coax that pesky plastic piece off the zero insertion force (ZIF) cable connector using a spudger. You’ve got this!
– With your trusty tweezers in hand, grasp the ribbon cable and give it a gentle pull to disconnect it from the device. Easy peasy!
Tools Used
Step 10
– Find that sneaky black electrical tape strip on the side of your device.
– With your trusty tweezers in hand, carefully peel back the tape from the device.
Tools Used
Step 11
– Once you’ve peeled away that electric tape, lift the green control panel like you’re uncovering a hidden treasure.
– Grab your trusty tweezers and gently detach the ribbon cable from the control panel—think of it as giving it a little hug goodbye.
– With the ribbon cable out of the way, the display should glide right off like it’s ready for a vacation.
