Lenovo Ideatab S6000 Battery Replacement
Duration: 45 minutes
Steps: 6 Steps
Having trouble with your Lenovo Ideatab S6000 running out of juice? It’s time to swap out the battery! Follow these simple steps to give your device the energy boost it needs. With just a little patience and a few tools, you’ll be back to enjoying your tablet in no time. If you need help, you can always schedule a repair.
Step 1
These screens are glued down pretty well, so they can be a bit tricky to remove. Take your time and be patient to make sure you get this step right. No rush, you’ll nail it!
– Gently work the speaker screens loose using a plastic opening tool. If they’re feeling a bit stubborn, try loosening them up first with tweezers or a craft knife. Take your time – these little things can be tricky, but with a little patience, they’ll come off!
Step 2
– Unscrew the two sneaky screws that were hiding under the covers.
Step 3
No metal tools allowed! Stick to the recommended tools to avoid any damage.
Take your time and work your way around the device while gently prying the backing off. No rush—patience makes all the difference here!
– Carefully work your way around the casing, using the spudger to gently pop the screen away from the back. Take your time!
– You’ll hear a satisfying little pop each time you free one of those lock tabs. Keep at it, you’re doing great!
Tools Used
Step 4
– Gently peel away the plastic that’s snugly wrapped around the battery cable.
Step 5
– Grab the plastic opening tool or just use your fingers, and gently pull on both sides of the plug until it pops free.
Step 6
– You’ve done the hard part—now it’s time to put everything back together! Just follow these steps in reverse and your device will be good as new.
– If you run into any trouble, you can always schedule a repair.
