Motorola Droid Turbo Headphone Jack Replacement
Duration: 45 minutes
Steps: 6 Steps
Ready to get your music back on track? Use this step-by-step guide to replace the headphone jack on your Droid Turbo. We’ve got you covered with a clear and easy-to-follow process. If you need help along the way, you can always schedule a repair.
Step 1
– Heat up your iOpener and place it on the back of the phone to loosen up the adhesive holding the rear case in place.
Tools Used
Step 2
Heads up: the wireless charging coil might want to cling to the rear case. Gently peel it away from the case before you fully lift the rear cover off the device.
– Grab a plastic opening tool and gently pry the rear case away from the device. Don’t rush – give it a little wiggle to loosen things up!
– Carefully remove the rear case from the device. You’re getting closer to the fix!
Step 3
– Gently pop off the midframe bezel and set it aside.
Step 4
– Grab your Torx T5 driver and zip out those four screws holding down the midframe plate. Set them aside somewhere safe—you’ll need them later!
Step 5
– Let’s get started by removing the midframe. This is the first step in giving your device a brand new lease on life!
Step 6
– Slide the pointy end of your spudger into the headphone jack and gently lift it up and away from the midframe. Take it slow—no need to rush greatness!
Tools Used
Success!
