Removing HP Compaq dx2000MT Case Fan
Duration: 45 minutes
Steps: 7 Steps
Ready to tackle the task of removing the case fan from your HP Compaq dx2000MT? You’ve got this! Follow along as we make this process simple and straightforward. Let’s get into it and keep that tech running cool!
Step 1
– Shut down your computer and unplug the power cable by pulling it straight out of the socket—easy peasy!
Step 2
– Unscrew the pair of Phillips #2 screws holding the case door in place on the device—easy as pie!
Step 3
This might require a bit of elbow grease, so just keep on pushing!
– Slide off that side case door by giving it a nudge towards the back of the device—your hand is all you need here.
– Once it’s slid back, go ahead and pull the door outward from the device to set it free.
Step 4
Just a heads up, you’ll need to give it some serious elbow grease for this step.
– Slide off that side case door by giving it a nudge towards the back of the device—your hand is all you need here.
– Once it’s slid back, go ahead and pull the door outward from the device to set it free.
Step 5
– Grab the 3-prong power connector on the motherboard and gently wiggle it out toward the side of the device. Easy peasy!
Step 6
– Pop those 4 push fasteners out of the case like a pro by:
– Using a tiny flathead screwdriver to gently pry them outward, and
– Grabbing them with tweezers or pliers to pull them out. Easy-peasy!
Tools Used
Step 7
– To put everything back together, just work your way through these steps in reverse – easy peasy!
– You did it! If you need help with another repair or have any questions, you can always schedule a repair.
Success!
