Removing the HP Compaq dx2000MT Case Doors
Duration: 45 minutes
Steps: 4 Steps
Alright, let’s get rolling! This step is all about popping off the side case doors. It’s a key move to access and replace every other component on the HP Compaq dx2000MT. You’ve got this!
Step 1
– Power down your computer, take a deep breath, and safely unplug the power cable by pulling it straight out of its socket. Easy does it!
Step 2
– Grab your trusty Phillips #2 screwdriver and unscrew the two screws holding the case door in place. Let’s get this show on the road!
Step 3
Don’t be afraid to apply some elbow grease – it’s gonna take a bit of oomph to get this done, so keep at it!
– Slide off that side case door by giving it a nudge towards the back of the device—your hand is all you need here.
– Once it’s slid back, go ahead and pull the door outward from the device to set it free.
Step 4
Alright, brace yourself—it might take some serious elbow grease to get this done.
– Give that side case door a gentle nudge towards the back of the device with your hand and watch it slide open.
– Once it’s moved back, just grab it and pull it outwards like you’re unveiling a surprise!
