Removing the HP Compaq dx2000MT Optical (CD) Drive
Duration: 45 minutes
Steps: 8 Steps
Let’s dive in and get that optical (CD) drive out of your HP Compaq dx2000MT! With just a few simple steps, you’ll have it removed in no time—smooth, stress-free, and totally doable.
Step 1
– Time to get started! Begin by switching off your computer and carefully unplugging the power cable from its socket. Just give it a gentle pull and it should come out easily.
Step 2
– Grab your trusty Phillips #2 screwdriver and remove the two screws holding the case door in place. Once they’re out, the door will be ready to come off!
Step 3
This might need some extra elbow grease, so keep at it and don’t give up!
– Slide off that side case door by giving it a nudge towards the back of the device—your hand is all you need here.
– Once it’s slid back, go ahead and pull the door outward from the device to set it free.
Step 4
Don’t worry, this part might require a bit of elbow grease, but you’ve got this! It could take some significant force, so be prepared to put in some effort.
– Give that side case door a gentle nudge towards the back of the device with your hand and watch it slide open.
– Once it’s moved back, just grab it and pull it outwards like you’re unveiling a surprise!
Step 5
– Detach the IDE data cable and the power cable from the optical drive by gently tugging them straight away—nice and easy, no need to yank!
Step 6
– Alright, let’s get this optical drive free! Grab your Torx T15 screwdriver and remove the two screws holding it in place. Keep those screws safe—they’ve got staying power but not the kind we need here!
Step 7
– Unscrew the remaining two Torx T15 screws that are keeping the drive’s other side snugly in place. You’ve got this—stay steady and keep those screws safe for later!
Step 8
– Slide the optical drive out the front of the device like a pro—easy-peasy!
Success!
