Repairing Black Display on an Asus Transformer TF101

Duration: 45 minutes
Steps: 3 Steps

Got a TF101 with a blank screen? No worries! The fix is pretty straightforward: just pop open the case and reconnect the display cable. Quick tip: after you finish the steps, peel off a small piece of tape from the display connector and press it firmly into place. I used some super sticky red construction tape to secure it, but tape choice is up to you. If things get tricky, you can always schedule a repair. Good luck and happy fixing!

Step 1

- Alright, let’s kick things off by unscrewing two small Torx screws at the bottom. I can’t tell you the exact size since I just grabbed a Torx screwdriver that happened to fit, but as long as it works, we’re good to go!

Step 2

- I used a metal opening tool to gently pry the bezel away from the front of the device. Once I got a small gap, it was pretty simple to slide my finger in and work my way around. A little patience and the bezel popped right off!

Step 3

- Now it's time to put everything back together! Just follow these steps in reverse, and you'll be all set. If you run into any trouble, don't hesitate to schedule a repair for a helping hand.

Success!
To put your device back together, just follow these steps in reverse order. You got this! And if things get tricky, remember you can always schedule a repair with us at Salvation Repair.

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.