Replace Microsoft Lumia 535 Screen: Step-by-Step Guide
Duration: 45 minutes
Steps: 9 Steps
Ready to dive into the world of repairs? Today, we’re tackling the disassembly of the Microsoft Lumia 535 to swap out that pesky broken screen, loudspeaker, earpiece, charging dock board, and more. Let’s roll up our sleeves and get your device back in action!
Step 1
– First things first, let’s power down your phone. A little nap never hurt anyone!
– Now, let’s get to the juicy part! Gently take out the battery along with any SIM and memory cards. They’re ready for a little break too!
Step 2
– Grab your trusty Torx T4 screwdriver and get ready to conquer! It’s time to unscrew those 9 screws like a pro.
Step 3
– Let’s get this party started! Gently pry the back cover away from the middle frame using your trusty plastic opening tool.
Step 4
– First things first, disconnect everything!
– Grab your Torx T4 and remove those 2 screws. Easy peasy!
– Next up, gently handle the touch screen flex cable.
– Now, let’s tackle the LCD Display flex cable. You’ve got this!
– For the Charging Dock board flex cable, remove the foam and tape, then flip up the black lock and ease out the flex. Smooth moves!
– Last but not least, the Coaxial antenna cable. Take your time here—pull the metal connector, not the cable, to avoid any mishaps. If you need help, you can always schedule a repair.
Step 5
– Get ready to dive into the repair world! Grab your tools and let’s make some magic happen. Remember, if you hit a snag, don’t hesitate to reach out for a helping hand. If you need help, you can always schedule a repair.
Step 6
– Alright, let’s gently transfer some components from the old display assembly, shall we?
– First up, the Earpiece – it’s your phone’s little speaker that lets you hear those sweet sounds!
– Next, let’s grab the Proximity Sensor Rubber. This little guy helps your phone know when to turn off the display during calls.
– Don’t forget the LCD Flex Cable Rubber! It’s essential for keeping everything connected and happy.
– Now, onto the Coaxial Antenna Cable – this helps your device stay connected to the network. Super important!
– Lastly, lift out the Small Board with the Charging Port and Mic. It’s where the magic happens when you charge up!
Step 7
The cable is connected at multiple spots to both the frame and the board. Carefully detach it with a gentle touch.
– Okay, time to disconnect the coaxial antenna cable. No worries, it’s like unplugging a lamp. Just give it a gentle pull and you’re good to go!
Step 8
Stick to plastic tools for the separation process—they’re your best buds here!
Step 9
– To put your device back together, just retrace your steps in reverse. You’ve got this!
Success!
