Replace Samsung Galaxy Tab 3 10.1 Battery
Duration: 45 minutes
Steps: 4 Steps
Ready to swap out that old battery for a new one in your Samsung Galaxy Tab 3 10.1? Follow this guide for a smooth, stress-free replacement.
Step 1
If your screen is cracked, don’t worry! Just place some tape over the broken area to prevent any injuries. Let’s get started on that repair!
– Grab your trusty plastic opening tools and start working your way around the edge of your Samsung Galaxy Tab 3 10.1. Gently pop it open bit by bit until the back cover comes off. Take it slow—your tablet deserves some TLC!
– Watch out as you slide those tools in—be mindful of the speakers on the left and right sides. The picture shows a spot for the right (small) opening tool that’s a little risky, so steer clear of that area to avoid any mishaps.
– When putting everything back together, don’t rush! Avoid popping in the bottom, left, or right edges first—it could mess up the power button or prevent the front panel from sitting perfectly flush. Patience is key!
Step 2
– Carefully peel back the tape covering the ribbon cable connectors and set it aside. With your trusty opening tools, gently lift the connector latches to disconnect those ribbon cables. You’re doing great!
Step 3
Keep those screws safe and sound so you can easily put everything back together later!
– Grab your trusty Phillips #00 screwdriver and let’s get to work! Carefully unscrew the ten screws that are holding the battery snugly against the motherboard. You’ve got this!
Tools Used
Step 4
– To put your device back together, simply reverse these steps.
– Cancel: I did not finish this guide.
– If you need help, you can always schedule a repair
