Replace Xbox 360 Drive Belt Guide

Duration: 45 minutes

Steps: 6 Steps

Step 1

How to easily fix a Xbox 360 drive that wont open.

– Let’s kick things off by gently removing the face plate.

Step 2

– Time to get this DVD Drive open! Use a trusty paper clip or a long pick tool to carefully pry it open. Remember to take your time and be gentle, we’re almost there!

Tools Used

Paper Clip

Step 3

– Grab your trusty tweezers and carefully pull that rubber belt, like you’re giving it a little high-five, between those two pulleys inside the DVD tray hole. You got this!

Tools Used

Tweezers

Step 4

– Give that rubber belt a good scrub with a damp paper towel. Get all the gunk off!

Step 5

– Time to get those rubber belts back on the pulleys! Grab your trusty tweezers and start with the big guy first. Once you’ve got the belt snugly fitted around the big pulley, loop it around the little one next. Easy peasy!

Tools Used

Tweezers

Step 6

– Close up the DVD drive and put the faceplate back in place. You’re almost there!

– Plug the system back in and see if the drive is working. You’re a superstar! If you need help, you can always schedule a repair

Success!

These steps have helped me fix 2 original Xbox systems and 3 Xbox 360 systems. I hope it helps! Let me know if you have any questions or need clarification on any of the steps. If you’re ever stuck, you can always schedule a repair.

Cancel: I did not complete this guide.