Samsung Galaxy A20e Fingerprint Sensor Replacement Guide

Duration: 45 minutes
Steps: 9 Steps

Get ready to tackle the task of swapping out that pesky broken fingerprint sensor on your Samsung Galaxy A20e with this handy guide! If you need help, you can always schedule a repair.

Step 1

– Alright, before diving into the repairs, make sure to unplug your Galaxy A20e from the charger and power it down. Safety first!

– Grab your trusty SIM card eject tool, a SIM eject bit, or even a straightened paper clip. Insert it into the small hole on the SIM tray that’s chillin’ on the left side of your phone.

– Give that SIM card eject tool a good push into the hole to pop out the SIM card tray. You got this!

– Now, go ahead and remove the SIM card tray. Easy peasy!

Tools Used
  1. SIM Card Eject Tool

Step 2

– Grab your trusty opening pick and gently slide it between the screen and the back cover on the left edge, right by that little hole for the SIM-eject tool. You’re doing great!

Step 3

– Gently glide the opening pick around the bottom left corner to release those sneaky plastic clips.

Step 4

– Gently glide the opening pick along the bottom edge to pop those pesky plastic clips loose!

Step 5

– Gently glide the opening pick along the right edge all the way to the top right corner to pop those plastic clips free!

Step 6

– Gently detach the phone assembly from its cozy back cover.

Step 7

– Grab your trusty opening pick and gently nudge it up to disconnect that fingerprint sensor. You’ve got this!

Step 8

– Gently nudge the left side of the fingerprint sensor with your trusty opening pick to glide it over to the right, freeing it from the motherboard cover. Remember, you’re doing great! If you need help, you can always schedule a repair.

Step 9

– Go ahead and take out that fingerprint sensor! You’ve got this!

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.