Samsung Galaxy A5 (2016) Back Cover Replacement Guide: DIY Tutorial

Duration: 45 minutes
Steps: 5 Steps

Ready to give your Galaxy A5 a fresh new look? Follow this guide to effortlessly swap out that back cover and keep your device looking sharp! If you need help, you can always schedule a repair.

Step 1

– First, grab your trusty iOpener and use it to heat up and loosen the glue that’s holding the back cover in place.

– Next, use a suction handle to carefully lift the back cover, and then slip an opening pick into the gap – you’re making great progress! If you need help, you can always schedule a repair

Tools Used
  1. iOpener

Step 2

– Slide your pick up to the middle and give that back cover a little nudge – time to separate it from the frame!

– Now, grab another pick and carefully wiggle it around the right corner, then down the bottom and up the left corner. You got this!

Step 3

– Grab another opening pick and keep pushing towards that top corner.

– Use one last pick to get through that final bit at the top.

Step 4

– Let’s get this party started! Take a plastic card and slide it gently underneath the back cover. You got this!

Step 5

– Fire up the back cover with some warmth again, so you can glide that plastic card toward the top like a pro.

– Slide that plastic card until you hit the camera bump. Now, give the back cover a gentle lift and then pull it off completely.

– Don’t forget to wipe away any leftover glue residue, and when you put it all back together, make sure to slap on some fresh adhesive for good measure.

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.