Samsung Galaxy Attain 4G Rear Housing Replacement Guide

Duration: 45 minutes
Steps: 7 Steps

Step 1

– Start by flipping your device over so the screen is facing down. Let’s get this repair party started!

Step 2

– Look up at the top of your device and spot that little notch—it’s your ticket to popping off the battery door!

– Grab a pry tool or just your trusty fingernail, and gently nudge the battery door away from the main housing. You’ve got this!

Step 3

– Time to say goodbye to the battery door! Gently set it aside.

– Grab your trusty pry tool (or your fingernail, if you’re feeling brave) and give the battery a little nudge upwards. It’s coming out, no worries!

– High five! You’ve successfully removed the battery. Feeling proud? We are.

Step 4

– When you’re swapping out the battery, just remember to keep that little arrow at the bottom pointing downwards. You’ve got this!

Step 5

– Unscrew those 6 Phillips head screws that are keeping the rear housing snug as a bug!

Step 6

– Grab your trusty spudger or a plastic pry tool and gently work your way around the phone where the display meets the rear housing. Take your time to pop those clips loose, and before you know it, you’ll be in!

Tools Used
  1. SpudgerSamsung Galaxy Attain 4G Rear Housing Replacement

Step 7

– Time to give that rear housing some air! Gently lift it away from the display assembly. You got this!

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.