Samsung Galaxy J1 Screen Replacement Guide

Duration: 45 minutes
Steps: 7 Steps

Step 1

– Let’s pop that back cover off! Gently slide a fingernail or plastic opening tool between the back cover and the device.

– Now, give it a little nudge and watch the rear cover come off. Smooth sailing!

Step 2

– Let’s pop that SIM card out! Gently pull it down with your finger, and then give it a little wiggle to get it out of its slot.

– Now, you’re ready to give that SIM card a little break. Remove it and set it aside.

Step 3

– Grab your trusty Phillips #00 screwdriver and tackle those eleven 3 mm screws with confidence!

Step 4

– Slide a plastic opening tool gently between the screen and the back of your device.

– Starting from the bottom, carefully glide the tool along the edges of the screen.

– With a gentle touch, pry the main assembly away from the midframe of your device.

Step 5

– Grab your trusty spudger and gently pry apart the digitizer cable connector with its flat end. You’ve got this!

Tools Used
  1. Spudger

Step 6

– Get started by using a plastic opening tool to carefully pry between the silver digitizer and the black back piece – it’s like opening a little door to the inside of your device.

– Now, slowly slide that plastic opening tool around the screen to loosen the adhesive. Take your time, and don’t worry if it takes a little bit of effort – you’re making great progress. If you need help, you can always schedule a repair

Step 7

– Let’s get that display assembly out of its plastic home! Gently and carefully pry it apart, making sure to avoid any accidental damage. You got this!

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.