Samsung Galaxy J7 Midframe Replacement Guide

Duration: 45 minutes
Steps: 4 Steps

Step 1

– First, track down that sneaky tab at the top left corner of the back cover – it’s highlighted by a red square for your convenience

– Next, grab a trusty tool like a plastic opening tool or even just your fingernail, and gently pry the tab open

– Now, carefully work your way around the edges to completely remove the back cover – you’re making great progress, and if you need help, you can always schedule a repair

Step 2

– Let’s find that battery! Look for a little slot in the bottom right corner of the battery – it’s marked with a red square.

– Time to give that battery a little nudge! Gently pop the edge out and pull it out carefully.

– Just a quick tip, make sure the battery is disconnected from the motherboard before pulling it out. If you need help, you can always schedule a repair

Step 3

– Grab your trusty Phillips #000 screwdriver and go ahead and unscrew those ten 4.2 mm screws that are hanging out around the midframe. You’ve got this!

Step 4

– Gently lift the back of your device using the iFixit opening tool and disconnect it from the front. You’re doing great!

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.