Samsung Galaxy S One Rear Case Replacement Tutorial
Duration: 45 minutes
Steps: 5 Steps
Heads up, tech whiz! Make sure you’ve got your tools ready and your workspace clear, because we’re diving into some gadget surgery! Keep this guide handy, and remember, if things get tricky, you can always swing by Salvation Repair or hit up our website to schedule some backup.
Follow this lively guide to swap out the back panel of your device. Let’s make it snappy and fun!
Step 1
You can totally skip the plastic opening tool for the next four steps, but hey, if you want to keep those clips in tip-top shape while prying open the rear case, using one might just be your best bet!
– Wedge a plastic opening tool or your fingernail into the groove at the top of the phone. You’ll find a handy little notch there, just waiting for you.
– Give that opening tool a gentle twist to pop open the clips holding the rear case’s top in place. It’s like unlocking a treasure chest!
Step 2
– Glide your plastic opening tool to the left along the top edge and give it another twist to crank up the space between the rear case and the phone.
Step 3
– Keep cruising with that plastic opening tool! Glide it around the top left corner’s edge, lifting the rear case with a gentle nudge as you go. It’s like coaxing a turtle out of its shell—easy does it!
Step 4
– Slide your spudger along the top right side, then shimmy it down the right side of the back casing. Keep the groove going!
Step 5
You might have to wiggle the case a bit to unclip it from any sneaky clips still hanging on to the bottom of the phone.
– Hoist the back cover off the phone like you’re unveiling a hidden treasure!