Samsung Galaxy S24 Ultra Battery Replacement Guide – DIY Tutorial

Duration: 45 minutes
Steps: 32 Steps

Ready to give your Samsung Galaxy S24 Ultra a fresh boost of power? This guide is all about swapping out that tired battery for a brand new one. Got a screen and battery assembly in need of love? This guide’s not for you, but we’ve got one just for that! If you need help with this repair, you can always schedule a repair.

Step 1

– First, let’s get started by unplugging any cables from your phone – we want to make sure it’s safe to work on.

– Next, hold down the side key and the volume down button, then select ‘Power off’ to shut down your phone. If you need help, you can always schedule a repair

Step 2

– Give your iOpener a little warmth party and stick it on the right edge of the back cover for a cool two minutes.

Step 3

– Grab a suction handle and stick it on the back cover, aiming for the center of the right edge—let’s get that cover off!

– Give that suction handle a good, steady pull to open up a little gap between the cover and the frame. You’ve got this!

– Slide an opening pick into that gap and keep moving forward.

Tools Used
  1. iOpenerSamsung Galaxy S24 Ultra Battery Replacement
  2. Suction HandleSamsung Galaxy S24 Ultra Battery Replacement

Step 4

– Gently slide the pick along the right edge, back and forth, to break the adhesive’s grip. You’re doing great!

– Keep that pick snugly in place near the bottom right corner to stop the adhesive from making a comeback. Nice work!

Step 5

– Heat up that iOpener and place it on the bottom edge of the back cover for a solid two minutes. You’re just warming things up for a smooth opening ahead!

Tools Used
  1. iOpenerSamsung Galaxy S24 Ultra Battery Replacement

Step 6

– Slide a second opening pick in right next to the first one, close to the bottom of the right edge.

– Gently rotate the opening pick around the bottom right corner to break the adhesive seal.

Step 7

– Slide that opening pick along the bottom edge, like you’re giving the phone a little hug, to separate the adhesive.

– Keep that pick chillin’ near the bottom left corner so the adhesive doesn’t get too cozy and stick back together. You got this!

Step 8

– Let’s warm up that back cover! Apply a heated iOpener to the left edge for two minutes. If you need help, you can always schedule a repair.

Tools Used
  1. iOpenerSamsung Galaxy S24 Ultra Battery Replacement

Step 9

– Slide your trusty third opening pick right next to the second one, cozying up to the left side of the bottom edge.

– Give that opening pick a little twist around the bottom left corner to break free from the adhesive’s grip.

Step 10

– Let’s get this party started by sliding your opening pick along the left edge to separate the adhesive. Keep going until you hit the power button.

– Hold your horses right there! Leave the pick in place near the power button to stop the adhesive from getting cozy again.

Step 11

– Warm up the iOpener and place it on the top edge of the back cover for a cozy two minutes.

Tools Used
  1. iOpenerSamsung Galaxy S24 Ultra Battery Replacement

Step 12

– Let’s start by slipping an opening pick into that gap at the top right edge. We’re just gonna gently wiggle it around to loosen things up.

– Now, give that pick a little twirl! Carefully rotate it around that top right corner to help separate the adhesive. We’re almost there!

Step 13

– Gently glide the pick along the top edge to break free the adhesive.

Step 14

– Now, let’s gently slide that pick around the top left corner and down the left edge. We’re just giving that adhesive a little nudge to say ‘hello’ and separate it. It’s like a friendly handshake, but with a tool!

Step 15

– Let’s get started – carefully remove the back cover to begin your repair journey.

– When it’s time to put everything back together:

– Use a pair of tweezers or your fingers to gently remove any leftover adhesive chunks. If it’s being stubborn, try applying some heat to help loosen things up.

– If you’re working with custom-cut adhesives, be sure to check out our guide for some helpful tips.

– And if you’re using double-sided tape, we’ve got a guide for that too – just follow along and you’ll be all set. If you need help along the way, you can always schedule a repair with the experts at Salvation Repair.

Tools Used
  1. TweezersSamsung Galaxy S24 Ultra Battery Replacement

Step 16

– Grab your spudger, and gently pry up that wireless charging coil press connector from the motherboard. It’s like giving it a little high-five to say ‘goodbye’ for now!

– To reconnect, carefully align the connector back onto its socket. Then, press down gently with your fingertip—one side at a time—until you hear a satisfying click. Don’t force it, just be patient. If it’s giving you trouble, just reposition it and try again. If you’re feeling a little lost, don’t worry! You can always schedule a repair with us. We’re here to help!

Tools Used
  1. SpudgerSamsung Galaxy S24 Ultra Battery Replacement

Step 17

– Grab your trusty Phillips screwdriver and give those ten 3.5 mm screws holding the wireless charging coil and the loudspeaker a spin – four for the coil, six for the loudspeaker. You’ve got this!

Step 18

– Grab your trusty spudger and gently lift a corner of the wireless charging coil tab that’s snugly stuck to the right edge of the frame. You’ve got this!

Tools Used
  1. SpudgerSamsung Galaxy S24 Ultra Battery Replacement

Step 19

– Grab an opening pick and gently slide it between the tab and the frame to create a little separation magic!

Step 20

– Let’s get that speaker out! Slide the tip of your trusty spudger into the gap between the speaker and the frame.

– Now, gently pry up to release the speaker. Think of it like giving the speaker a little hug goodbye.

Tools Used
  1. SpudgerSamsung Galaxy S24 Ultra Battery Replacement

Step 21

– Take the wireless charging coil and loudspeaker for a little vacay from the frame! Let them go on a much-needed adventure while you work on the repair. Oh, and when it’s time to put them back together, you’ll want to give the loudspeaker a light squeeze around the edges to help it snap into place. Then, slide those screws back in like you’re sliding into home base! If you need a little help, don’t be afraid to reach out and schedule a repair!

Step 22

– Time to get started! Use a spudger to carefully pry up and disconnect the battery press connector. If you need help, you can always schedule a repair

Tools Used
  1. SpudgerSamsung Galaxy S24 Ultra Battery Replacement

Step 23

– Grab your trusty spudger and give those interconnect cable press connectors a gentle nudge to disconnect them from the motherboard. It’s like giving them a little high five, but with a tool!

Tools Used
  1. SpudgerSamsung Galaxy S24 Ultra Battery Replacement

Step 24

– Time to give those interconnect cable press connectors a little love! Gently use a spudger to pry them up and disconnect them from the daughterboard. Don’t worry, it’s like a little electronic dance party. If you need help, you can always schedule a repair.

Tools Used
  1. SpudgerSamsung Galaxy S24 Ultra Battery Replacement

Step 25

– Hey there! Let’s keep things cool and collected. Snatch those interconnect cables and give ’em their space, so they’re ready to rock and roll again!

Step 26

– Time to give that display cable a little nudge! Gently pry up the connector with your spudger and disconnect it from the motherboard. You’ve got this!

Tools Used
  1. SpudgerSamsung Galaxy S24 Ultra Battery Replacement

Step 27

– Let’s gently detach that display cable! Use a spudger to carefully pry up and disconnect the connector from the daughterboard.

– Now, it’s time to give that display cable a little wiggle and remove it.

Tools Used
  1. SpudgerSamsung Galaxy S24 Ultra Battery Replacement

Step 28

– Use a spudger to gently lift and disconnect the lower antenna cable press connector from the motherboard. It’s like giving the cable a little high five!

– Now, move that lower antenna cable outta the way so you can get to the battery. It’s like making room for a party!

Tools Used
  1. SpudgerSamsung Galaxy S24 Ultra Battery Replacement

Step 29

– Gently tug the battery pull tab to the left side of the phone, like you’re giving it a little nudge to say, ‘Time to come out!’

Step 30

– Alright, let’s get those little tabs out of the way. Carefully separate the small, clear tabs above and below the blue part of the pull tab.

– Now, gently bend those tabs away from the battery so they don’t get in the way. You’re doing great!

– Your device might have a couple more tabs on the bottom edge of the battery. These are meant to tear off during the next step, but if you’re having a bit of trouble, go ahead and carefully peel those little guys up too. Don’t worry, we’ve got you covered! If you need help, you can always schedule a repair

Step 31

– With one hand securely gripping the phone’s frame, give that blue pull tab a confident lift straight up. You’ll feel the battery break free from the sticky adhesive below—just like magic!

– Now, gently place the battery over the right edge of your phone, ready for its next adventure.

Step 32

– Gently peel away the leftover film from the frame, like you’re unveiling a masterpiece!

– Carefully take out the battery, treating it like a delicate little treasure.

– If you’ve used isopropyl alcohol, give it a breather for ten minutes before popping in the new battery. Let that alcohol evaporate completely—it’s worth the wait!

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.