Samsung Galaxy S6 Active Display Assembly Replacement Guide
Duration: 45 minutes
Steps: 10 Steps
Hey there! Ready to tackle this repair? Before you dive in, remember that patience and a steady hand are your best friends. If you need help, you can always schedule a repair. Let’s get started and make it happen!
Get ready to dive in! First up, we’re going to take off the Display Assembly, which includes both the LCD and the Digitizer. Once you’ve got that off, a whole new world of phone components will be open for you to explore!
Step 1
– Hey there! Grab a plastic opening tool or use your fingernail to gently nudge the SIM tray from its cozy socket. Let’s slide it out with finesse!
Step 3
To prep your iOpener, pop it in the microwave for a quick 30-second warm-up.
– Get that phone feeling warm and cozy by gently heating up the front face (sides, top, bottom) with the super cool iOpener, a hair dryer, or a heat gun for about 60 seconds. This will give the adhesive around the edge of the glass a nice little stretch, making it easier to work with.
Tools Used
Step 5
Be gentle with that display! If you feel any resistance, just take a step back and give Step 3 another go, letting the iOpener work its magic a bit longer.
– With the suction cup in hand, gently tug at the bottom half of the panel to set the stage for your repair journey.
Tools Used
Step 6
– Once you’ve created a nice little opening, slide a plastic tool in at the bottom, right between the glass and the phone’s frame. It’s like giving your phone a little hug!
– Now, gently glide that plastic opening tool around the screen, coaxing the display away from the body. Take your time; it’s a delicate dance!
Step 7
Just a friendly reminder: lift the lower part of the screen gently! It’s clipped to the top of the motherboard, and if you tug too hard, it might decide to break free. Take it easy, and you’ll be just fine!
– Gently tug on the lower half of the screen with your trusty suction cup while keeping a firm grip on the phone’s frame to help separate the two parts. You’ve got this!
Step 8
– Once you’ve gracefully removed the glass, behold a charming little clip covering the screen connection to the motherboard at the top of your beloved device. Simply employ your trusty tweezers to snag the clip from its cozy crease on the side and gently coax it out.
