Samsung Galaxy Xcover LCD Replacement Guide: DIY Step-by-Step Tutorial
Duration: 45 minutes
Steps: 7 Steps
Ready to breathe new life into your Galaxy Xcover? Let’s get started with replacing that LCD. If you need help, you can always schedule a repair
Step 1
– Let’s get started with fixing your Samsung Galaxy Xcover. We’ve got a broken LCD that needs replacing, so grab your tools and let’s dive in. If you need help, you can always schedule a repair
Step 2
– First up, let’s tackle that battery door! You’ll notice it has a little security lock – make sure it’s in the open position. Start at the bottom and gently work your way up, releasing those side edges with care. You’ve got this!
Step 3
– Let’s get those buttons off! Use a flat screwdriver to gently pry off the volume button and the power button.
– Now, grab your trusty Phillips screwdriver and give those back cover screws a spin. They’ll come right off!
Step 4
– Grab your trusty flat screwdriver or plastic opener, and give those cases a gentle nudge apart. It’s like a little dance, separating the front from the back. You got this!
Step 5
Watch out! That shiny strip down there is the LCD flex cable, so handle it with care!
– Alright, let’s get this party started! First up, we’re going to take a little spin around the main board and remove that screw in the lower zone. It’s the same size as the case screw, so don’t worry if you get them mixed up – they’re all part of the team!
– Now, grab your trusty pliers and gently unplug the camera and front speaker. Time to lift the main board – be careful, it’s a delicate flower! If you need help with any of this, you can always schedule a repair.
Step 6
– First, carefully remove the LCD flat cable. Next, take out the two screws on the sides of the front cover – they’re the same as the other screws you’ve seen so far.
– Now you’re ready to separate the chassis from the front cover. Just gently pull them apart, and you’ll be left with the display and touch screen still connected.
Step 7
Stay tuned, we’ve got a touch screen replacement guide coming soon! If you need help in the meantime, you can always schedule a repair
– Alright, let’s get this party started! First things first, gently lift that black retainer and carefully detach the touch flex cable.
– Heads up, the flex cable has some double-sided tape under the IC, so be a little careful.
– Now, using a trusty knife or cutter, carefully pry off the LCD unit. Time to put in that fresh new LCD, and then we’re ready to put this thing back together like a champ!
