Sony PlayStation 3D Display Rear Case Replacement
Duration: 45 minutes
Steps: 4 Steps
Step 1
– Press the button and slide the unit out to detach the base. Easy peasy!
Step 2
By keeping the cover secure, you’ll avoid it getting stuck under the back plate after you’ve removed it.
– Gently pry off the USB port cover from the back plate using a metal spudger. Take it slow and steady, and you’ll be all set!
Tools Used
Step 3
These screws are like unique little snowflakes, each with their own threads! Keep them separated to avoid any mix-ups.
– Grab your trusty Phillips #02 screwdriver and unscrew the six 6 mm length x 6 mm head screws holding the backplate in place. Go ahead, you’re doing great!
– Using the Phillips #02 screwdriver, twist out the ten 6 mm length x 8 mm head screws from the backplate. Nice and steady—you’re nailing this repair!
Step 4
Handle with care to avoid snapping those plastic clips that keep the plate in place.
– To put your device back together, just wiggle through the steps in reverse—easy peasy!
– If you’re feeling stuck or need a hand, you can always schedule a repair.
