How to Replace Asus VivoTab Smart Speaker – Step-by-Step

Duration: 45 minutes
Steps: 4 Steps

Get ready to dive into the world of repairs! In this guide, we’ll walk you through the steps to take off the back panel of your Asus VivoTab Smart and swap out that pesky speaker. Don’t worry, we’ve got your back with all the tools you’ll need listed below. If you hit a snag, remember, you can always schedule a repair for some extra help!

Step 1

– Let’s get started! Place your device face down on a flat surface, making sure it’s stable and secure.

– Now it’s time to remove the back panel. Use a plastic opening tool to carefully slide around the edge of the panel until it comes off. Take your time and work your way around – it’s easier than you think!

Step 2

– Gently unplug the speaker wire from the device. Use tweezers to grab the wire near the white plug and pull it out slowly and carefully.

Tools Used
  1. TweezersAsus VivoTab Smart Speaker Replacement

Step 3

– Take out those two 2.7 mm Phillips #00 screws.

– Now, remove the two 3.7 mm Phillips #00 screws.

Step 4

– You did it! To put everything back together, just follow these steps in reverse. Easy peasy!

– If you need help or didn’t quite get it done, don’t worry! You can always schedule a repair with Salvation Repair.

Success!
Now it’s time to put your gadget back together! Just follow these steps in reverse, and you’ll be all set.
If you’re feeling a bit stuck, don’t hesitate to schedule a repair for some extra help.

Leave a Reply

Your email address will not be published. Required fields are marked *

🍪
Have a cookie! This site uses cookies to enhance your experience. Opt-Out Options.