Alactel Joy tab 2 Teardown

– Use your trusty Opening Picks to carefully pop off the case and lift the cover right off. Take it easy, it should come off without a fuss!

– Be prepared for a hefty amount of adhesive here. It’s a sticky situation, but stay patient and work carefully. If you need help, you can always schedule a repair.

– Feeling stuck? No worries! Take a deep breath and keep going. Sometimes, a quick break is all you need to come back with fresh eyes. Remember, Salvation Repair is here to help if things get really tricky—just schedule a repair if you need extra hands. Keep it steady, and you’ll get there!

– Use a Phillips 00 screwdriver to unscrew those circled screws—easy does it!

– Next up, gently disconnect these three cables to free up the components.

– Start by unscrewing all the screws in the marked area using a Ph 00 bit—think of it as loosening the lock to the treasure. Then, gently pry up with an Opening Pick and peel away the tape to reveal what’s underneath. If you need help, you can always schedule a repair.

– Now remove the mainboard with a Spudger.

– Oh look, a baby camera module!

– I tried to reveal the CPU, but those RF shields are stubborn—they just won’t come off. I even grabbed the Dremel and gave it a shot, but no luck there. Don’t worry, sometimes these shields need a different approach. If you’re stuck, you can always schedule a repair for some extra help. Keep going—you’ve got this!