Wii Balance Board Teardown
Duration: 45 minutes
Steps: 5 Steps
Step 1
No need to yank off the big chip or the whole motherboard—just take out the screws in the middle so nothing gets damaged.
– Start by removing the four circles from the balance board. They’re chilling in the corners, so no surprises there.
– Next, unscrew the four corner circles first, then go for the middle screws that are holding the base in place.
– Once those are out, gently remove the circles and base, and you’re halfway to victory.
Step 2
– Start by removing the screw in the center of the motherboard. Once that’s done, you should be able to lift it right off with ease.
Step 3
– Once you’ve finished, just pop that motherboard back in and secure it with the screws just like it was before. You’ve got this!
Step 4
– Once you’ve secured the motherboard with screws, start by screwing in the middle piece first. This way, you’ll have everything aligned properly before closing it all up. Keep going, you’re doing great—if you need a hand, you can always schedule a repair.
Step 5
– Finally, it’s time to fasten those corners and circles, and just like that, you’re all set!