DIY Guide to Create a Custom Cotton Swab for Skills
Duration: 45 minutes
Steps: 4 Steps
Hey there! Just a friendly reminder: if you’re feeling a bit stuck or need an extra hand, don’t hesitate to schedule a repair. We’ve got your back!
Dive into this guide to whip up your very own custom cotton swab, perfect for giving those hard-to-reach electronic components a good clean, especially charging ports. Let’s face it, most store-bought cotton swabs are just too bulky for those tiny spaces, and the fluffy ends tend to snag on sharp bits. With these DIY cotton swabs, you’ll have a slimmer design and tightly packed cotton, making your device-cleaning mission a breeze!
Step 1
Steer clear of metal objects like paperclips and anything fragile that could break off in your charging port. Keep it clean and safe for smooth charging!
– Grab a small, pointy object that you can find around the house. Here are some ideas:
Step 2
– Tear off a tiny piece of a cotton ball.
Tools Used
Step 3
– Cozy up that cotton around the tip of your tool like a warm blanket.
– Give it a little roll between your fingers to squish it into a sleek, thin layer.
Step 4
– Give your cotton swab a little test run on your device to check if it’s the perfect fit.
– If your swab feels a bit loose, just trim off any extra cotton and roll it up again nice and tight at the tip.
– And there you go! Your custom cotton swab is all set to go. Now, just hop back to where you left off in your guide.
